Multiple Connections from a Single Source

Coax Splitter Vs Tap: Choose the Best Cable Splitter for Your Device

Author:

Published:

Updated:

Coax Splitter Vs Tap

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

To use a coax splitter or a coax tap – That’s the real question!

We have often come across queries about  cable splitters and taps. Due to the number of options available
in the market, pretty much everyone is confused. Are they the same? Is it possible to use them
interchangeably? Do they have different features that we need to be aware of? We understand
choice can often cause distress, which is why we are here to help. In this article, we shall discuss the
coax splitter and coax tap separately so that you understand the differences and make the right
choice.

Coax Splitter Vs Tap: Choose the Best Cable Splitter for Your Device

Coax splitters

Coax splitters

Coax splitters are simple devices that split an outside feed or signal into multiple signals. You can
also call them “dead end” devices for the same reason. They have a simple job, and they do just
that. However, the thing to note here is that they are not as efficient as you would like them to be.
When coax splitters split the signal, it experiences a loss. This means that the output is not as good
as the input. The situation further worsens when you stack a couple of coax splitters. The loss keeps
adding up.

Coax tap

Coax tap

Coax taps also split the signal just like coax splitters, but the difference here is that the signal loss is
minimal. It is, in fact, negligible when compared to coax splitters. Coax taps are very commonly used
for televisions and set-top boxes. They are excellent for use in places that require multiple displays
from one source. The signal travels from the source through a trunk line and into the tap from where
it is dispatched to various TV screens or displays. Attenuation occurs on multiple levels in this case.

Coax splitter vs tap – Who is winning?

If you have read so far, you will know that coax taps are the best way to go. They minimize signal
loss and ensure that you don’t compromise on the output. However, we urge you to consider the requirement before you take a call. In some instances, a coax splitter may make much more sense to
you. In offices and schools, on the other hand, taps are handier.

While coax taps are splitters too, a few differences here and there force us to spend more time on
research before making a decision. We hope this article helps you cut down the research bit and
enables you to make the right choice. All the best!

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.